2.
Logging in to the HS800
Step 1: Start your Browser
Start your browser, and then enter the factory default IP address 10.0.0.1 in your
browser's location box. Press Enter.
Step 2: The HS800 Wireless Gateway Configuration Tools Menu
The HS800 Wireless Gateway configuration tools menu will appear. In the
Username and Password field, type the factory default user name (admin) and
password (admin)and click "Getting Started". Select the "Advanced Setup"
tab to access the customisation screens.
Rev. 1 - YML698
HS800 User's Guide
Figure 2-1 Web Browser Location Field (Factory Default)
Figure 2-2 Configuration Tools Menu
www.netcomm.com.au
Page 11