Mac Address Filtering - NetComm 802.11 User Manual

MAC Address Filtering

This wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your
wireless network.
Enable wireless access control: Enable the wireless access control function
Adding an address into the list
Enter the "MAC Address" and "Comment" of the wireless station to be added and then click <Add>. The wireless
station will now be added into the "Current Access Control List" below. If you are having any difficulties filling in
the fields, just click "Clear" and both "MAC Address" and "Comment" fields will be cleared.
Remove an address from the list
If you want to remove a MAC address from the "Current Access Control List ", select the MAC address that you
want to remove in the list and then click "Delete Selected". If you want to remove all the MAC addresses from the
list, just click the <Delete All> button. Click <Reset> will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
YML800NX 800NX X
www.netcomm.com.au
802.11n Wireless Router
Power Power Power Power User Guide
n