Lan - NetComm 802.11 User Manual

LAN

The LAN Tab reveals LAN settings which can be altered. If you are an entry level user, try accessing a website from
your browser. If you can access a website without a glitch, just do not change any of these settings.
Click <Apply> at the bottom of this screen to save the changed configurations.
LAN IP
IP address: 192.168.20.1. It is the router's LAN IP address (Your LAN clients default gateway IP address). It can
be changed based on your own choice.
IP Subnet Mask: 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is enabled, this router will
use the spanning tree protocol to prevent network loops.
DHCP Server
DHCP Server: This will enable or disable the Dynamic Pool setting..
Lease time: This is the lease time of each assigned IP address.
Start IP: This will be the beginning of the pool of IP addresses available for client devices.
End IP: This will be the end of the pool of IP addresses available for client devices.
Domain name: The Domain Name for the existing or customized network.
YML800NX 800NX X
www.netcomm.com.au
802.11n Wireless Router
Power Power Power Power User Guide
n