Charging The Battery; Registering The Handset - Gigaset SL910 Manual

Charging the battery

The battery is supplied with a partial charge. Please charge it com-
pletely before use.
¤
Charge the handset in the charger cradle for 5 hours.
Please note
u
The handset must only be placed in the designated charger cradle.
u
The battery is also charged if the handset is connected via a USB connection to a PC with
a power supply of 500 mA
u
The battery may heat up during charging. This is not dangerous.
u
After a time, the charge capacity of the battery will decrease for technical reasons.

Registering the handset

Handsets contained in the package have already been registered to the base. If, however, a
handset has not been registered (display "Handset not registered to any base"), please register
it manually. You must initiate registration on the base and on the handset:
¤
1) On the base: Press and hold (for approx. 3 seconds) the registration/paging key.
2) On the handset (within 60 seconds):
of the base (default setting: 0000) and confirm with è.
Setting up the base and handset — installation wizard
Once the battery has been inserted, the time and date symbols flash. The installation wizard
starts automatically as soon as you touch one of the flashing symbols. It helps you to configure
the following key settings on the handset and base. These keys are required for operation:
u
Time and date
u
Display language
u
Country in which the phone will be used
u
Your own area (dial code)
en fr fa ar
¤
Press Register and if necessary, enter the system PIN
Getting started
5 h
9