Inserting Sim And Sd Cards; Charging The Battery - Gigaset GX290 Manual

Inserting SIM and SD cards

You can choose between using two Nano-SIM-cards or one Nano-SIM-card
plus a Micro-SD-card with your smartphone
¥
Open the SIM/SD card slot. To do this,
poke the enclosed SIM card needle into
the small opening on the SIM/SD card
¥
slot and press.
Pull out the card slot.
¥
Place the nano SIM card(s) / micro SD
card in the card slot.
Do not exert any force when inserting the
SIM or the memory card because doing so
might damage the card slot.
¥
Face the screen towards you.
Replace the SIM/SD card slot and push
down until it clicks into place.

Charging the battery

¥
¥
Remove cover
Plug in the USB connector type C of the
¥
supplied charger cable.
Connect the power adapter to the USB
connector of the charger cable and con-
nect it to the power source.
The battery is built in for improved battery life without increasing
the device measurements.
16
SD card
SIM card
de en es fr it nl pt
1