Section 2 - Installation
Follow the steps below to mount the camera enclosure with the
gooseneck tube.
1.
Make a cable entry hole on the wall to recess the cables.
Alternatively, cables can be threaded through the cable entry hole
on the tube.
2.
Affix the gooseneck tube to the wall with screws and screw anchors
(not supplied).
3.
Attach the waterproof collar to the gooseneck tube.
4.
Thread the cables through the gooseneck tube and the cap.
5.
Affix the cap to the gooseneck tube with the supplied screws and
washers. Adjust the waterproof collar to the junction of straight
tube and cap.
6.
Connect the cables to the camera enclosure. Attach the camera
enclosure to the cap and affix it with the supplied bolt.
Note: After threading the cables, please block the cable entry hole with
the supplied sponges to prevent insects from entering the tube.
D-Link DCS-6815 User Manual
Wall Mounting - Gooseneck Tube
Recessed Cables
Exposed Cables
14