Motion Detection - D-Link DCS-6815 User Manual

Hide thumbs Also See for DCS-6815:

Table of Contents

Section 3 - Configuration

This section allows you to enable and configure motion detection areas.

Enable:

Tick this checkbox to enable motion detection.

Enable Type:

You may choose to always use motion detection, or only on

certain days at specific intervals.

Schedule Days:

For scheduled recording, you may choose which days of the

week to record.

Start Time:

Select the time when the motion detection should begin.

Select the time when the motion detection should stop.

Stop Time:

The viewing area is divided into nine numbered blocks. Click

Detect Area:

on a block to select it for motion detection. Areas is designated

for motion detection will appear in red.

Defines the basic sensitivity of the motion detection. Adjust

Sensitivity:

this value first. Low values mean that minor motions lasting

only a short time will not trigger the alarm. Acceptable values

are between 1 and 100.

D-Link DCS-6815 User Manual

Motion Detection

Table of Contents