Ptz Sequence - D-Link DCS-6815 User Manual

Table of Contents

Section 3 - Configuration

The function executes pre-positioning of the pan, tilt, zoom, and focus features in a certain sequence for a camera. Before setting this

function, users must define at least two preset points.

Path:

Up to 8 preset paths can be defined. Each path can contain

up to 32 preset points. Select the button next to the path that

you would like to set.

Move the camera to the desired preset position and click Add

Set Preset Point:

to set a point.

Dwell Time:

The number of seconds that the camera should remain at the

specified preset point.

Speed:

The speed at which the camera should move between the

specified presets.

Delete/Modify:

You may select a defined preset and delete or modify it.

Note: All preset points must be valid to ensure proper operation.

D-Link DCS-6815 User Manual

PTZ Sequence

Table of Contents