Additional Functions; Stop & Go; Recall - Miele KM 6366-1 Operating And Installation Instructions

Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power setting 1.
The cooking zone power settings and
the timer settings cannot be altered and
the cooktop can only be switched off. A
set minute minder time will continue to
count down. Booster time, Auto heat-
up and automatic switch-off times set
will be put on hold.
When Stop & Go is deactivated, the
cooking zones will operate at the power
setting previously selected and all the
times will resume running.
If the function is not deactivated within
10 minutes, the cooktop will switch
off.
Activation / Deactivation
 Touch the  sensor.
Use this function when the sensors
need to be cleaned quickly or there is a
risk of boiling over.

Additional functions

Recall

If the cooktop is switched off in error
during operation, this function can be
used to reset all settings to the way
they were. For this to work, the cooktop
must be switched on again within 6
seconds.
 Switch the cooktop on again.
 Touch the  sensor within 6
seconds after the cooktop is
switched on.
35