Miele KM 6366-1 Operating And Installation Instructions page 43

Problem
A noise can be heard
after the appliance is
switched off.
 and numbers are
flashing in the cooking
zone displays and a
tone sounds.
 or  and numbers are
flashing in the cooking
zone displays.
Possible cause and remedy
The fan will continue running until the appliance has
cooled down. It will then switch itself off
automatically.
The cooktop is incorrectly connected.
 Contact Miele or a qualified electrician. The
cooktop must be connected to the mains
according to the wiring diagram.
The overheating protection mechanism has been
activated.
 See "Overheating protection".
 or  and other numbers.
There is an electronic unit fault.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
Problem solving guide
43