Switching On; Selecting/Changing The Power Setting; Switching Off; Residual Heat Indicator - Miele KM 6366-1 Operating And Installation Instructions


Fire hazard!
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating up time
on induction cooktops is very much
shorter than on conventional
cooktops.

Switching on

 Touch the  sensor.
 appears in each of the cooking zone
indicators. If no further entry is made,
the cooktop will turn itself off after a few
seconds for safety reasons.
Selecting/Changing the power
setting
 Touch the appropriate number sensor
for the power setting you want.
The selected power setting will appear
in the cooking zone display.

Switching off

 To switch off a cooking zone, touch
the 0 sensor for that cooking zone.
 To switch off the cooktop and all the
cooking zones, touch the  sensor.

Residual heat indicator

If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.

Danger of burning! Do not touch
the cooking zones whilst the residual
heat indicators are lit up.
Operation
27