Danfoss ECL Comfort 210 Installation Manual page 37

Installation Guide
Application Key: Situation 3
A copy of the controllers settings is needed for configuring
another controller.
This function is used
• for saving (backup) of special user and system settings
• when another ECL Comfort controller of the same type (210 or
310) must be configured with the same application but user /
system settings differ from the factory settings.
How to copy to another ECL Comfort controller:
Action: Purpose:
Choose 'MENU'
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
Go to 'Key functions'
Confirm
Choose 'Copy'
Confirm
Choose 'To' .
'ECL' or 'KEY' will be indicated. Choose
'ECL' or KEY'
Push the dial repeatedly to choose
copy direction
Choose 'System settings' or 'User
settings'
Push the dial repeatedly to choose
'Yes' or 'No' in 'Copy' . Push to confirm.
Choose 'Start copying'
The Application Key or the controller
is updated with special system or user
settings.
*
'ECL':
Data will be copied from the Application Key to the
ECL Controller.
'KEY':
Data will be copied from the ECL Controller to the
Application Key.
**
'NO':
The settings from the ECL controller will not be copied
to the Application Key or to the ECL Comfort controller.
'YES': Special settings (differing from the factory settings) will
be copied to the Application Key or to the ECL Comfort
controller. If YES can not be chosen, there are no special
settings to be copied.
Danfoss District Energy
ECL Comfort 210 / 310, application A231 / A331
Examples:
*
'ECL' or 'KEY' .
**
'NO' or 'YES'
VI.LG.P1.02 DEN-SMT/DK 37