Mitsubishi MR-BX52W-N-P Operating Instructions Manual page 33

Table of Contents

Advertisement

When the
blinks rapidly
(about 5 times
per second)
When the alarm
keeps sounding
Demonstration
mode status
When the entire
display blinks 3 times
at regular intervals
even though you have
not operated any
buttons
When the
compartment and
temperature control
displays on the
operation panel blink
in turns
* Regarding
, the
display for the
button may change
depending on the
setting.
Issue
mark
An inspection is required. Contact the retail store where you
purchased the refrigerator.
Press
doors are closed. If the alarm sounds even after closing the door, an
inspection is required. Contact the retail store where you purchased
the refrigerator.
The refrigerator does not cool in this mode. Contact the retail store
where you purchased the refrigerator, or cancel the demonstration
mode with the procedure below.
To cancel the demonstration mode
Keep the doors of the refrigerator compartment open.
Press
Press
seconds or more.
Make sure that there is no blinking of the display area a minute after
closing the door.
(If the display still blinks, the demonstration mode has not been
canceled.)
Action
for about 5 seconds to stop the alarm. Check if the
twice.
,
, and
at the same time for 5
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr-bx52w-br-pMr-bx52w-n-mlMr-bx52w-n-hMr-bx52w-br-ml

Table of Contents