How To Use The Operation Panel - Mitsubishi MR-BX52W-N-P Operating Instructions Manual

How to Use the Operation
Panel
The operation panel indications are not lit in the normal state for the purpose of power saving.
To check the setting status, press a operation panel button to light up the display.
Set each compartment when the operation panel display lights up.
To save power, the operation panel display turns off if there is no operation for about 30 seconds.
•
If the operation panel display turns off, the display of the buttons (
• stays displayed during supercool freezing.
ECO GUIDE
The "ECO Level" of the refrigerator is
indicated by three
Power saving button
ECO MODE can be set.
Power Save Mode can be set.
Setting display area
The settings for each compartment
are displayed.
Temperature/
setting button
The temperature setting of each
compartment can be set.
The setting of the ice making
compartment can be selected.
Supercool freezing/
fast cooling button
Supercool freezing and fast cooling
can be set.
Note
10
marks.
Page 20
Page 20
Page 22
Pages 12-13
Page 18
Pages 14-15
*
After a door is closed, the ECO GUIDE and
The ice tray is operating while
If you have forgotten the settings or to return the settings to their intial condition (at the time of purchase) (setting
Page 23
reset)
All items are displayed
for illustrative purposes.
displays light up for about 30 seconds.
is blinking. Do not remove the ice tray.
) also turns off.
Compartment display area
The selected compartment is
displayed.
Compartment
selection button
The display changes in the following
order each time the button is pressed.
is displayed at the time of purchase.
display
The display for the supercool freezing/fast cooling
button changes, depending on the displayed
compartment or the temperature setting.
Display names Displayed compartment
When displaying the versa
compartment (with soft freezing).
When displaying the refrigerator,
versa compartment (with freezing),
freezer, and vegetable compartments
When displaying the ice making compartment
• When the versa compartment
is set to Power Save Mode
* A setting is not valid unless
the display is lit. (A buzzer
sounds once.)
* The name of the button lights up according to the
displayed compartment and the temperature setting.
Page 15
Page 14
Page 22