Cleaning The Automatic Ice Maker - Mitsubishi MR-BX52W-N-P Operating Instructions Manual

Cleaning the Automatic Ice
Maker
Clean the ice maker periodically to ensure that the ice is
pure and delicious.
Prevents formation of water scale and mold.
* Do not use a dishwashing machine, because it may deform the parts.
once a
week
1
Remove the lid and wash it.
* If mold forms easily in the certain types of water,
clean about 2 or 3 times a week.
When using bleach to clean the water tank and
lid, follow the product instructions.
Water supply pipe and tank holder
once a
month
1
Pull out the water supply
pipe and wipe the tank
holder with a clean cloth.
Do not pour water into the tank
holder. Doing so may cause a
malfunction.
2
Disassemble and
wash the parts.
Rotate and remove the
aluminum pipe.
* White minerals or chlorine
accumulation may be adhered to
the parts, this is not abnormal.
Wash off such substances and
reuse the parts.
3
Follow the procedure in reverse to
return the parts to their
original positions.
Push in the water supply
pipe fi rmly so that there is no
unevenness. Using the water
supply pipe while it is unevenly
set may cause a malfunction.
If the water supply pipe is not
installed, the food inside the
4
refrigerator compartment may freeze.
Check that there are no foreign objects
between the water supply pipe and the tank
packing or tank holder.
If the parts are not inserted
fi rmly or there are gaps due to
foreign objects, it may cause
abnormal noise or prevent
ice from forming. It may also
cause the water in the water
tank or food in the refrigerator
compartment to freeze.
28
Water tank
Align the mark on
the water tank cap
with the mark on the
lid, and remove it.
Mark
Tank
packing
(Upper temperature limit about 60°C)
1~2 times
a
year
1
Water supply pipe
2
Tank holder
Easier to disassemble/
assemble when wetted
Packing
Aluminum
3
Pipe
Water supply pipe
4
5
Tank holder
Horizontally
Not to let
foreign
objects in
6
Water supply
pipe
Ice tray
Set the ice making setting of the ice
making compartment to
When is blinking, perform the operation 2 after waiting
for the blinking to be fi nished.
Open the door of the ice
making compartment and
unlock the ice tray lock lever.
When the ice tray lock lever is unlocked the
If the buzzer sounds continuously after removing the ice
tray lock lever, close the door.
Pull the ice tray
towards the front and
then remove it.
There is a risk of the water spilling.
Pull out the tray slowly.
Empty the ice tray and wash it.
After washing the tray, dry off any moisture.
Push in the ice tray until it makes a clicking
sound, and then lock the ice tray lock lever.
Check that is off.
If the lamp is on, check the setting status such as the position of the
ice tray lock lever and the up and down orientation of the ice try.
Ice tray lock lever is locked
Set the ice making setting of the ice making
compartment to or
.
Page 18
display turns on.
Lift slowly to
remove it
Ice tray lock lever is released
.
Page 18