Warranty; Accessories And Spare Parts En; Customer Service - Kärcher HDS 801 D Instruction Manual

Burner does not start
Temperature limiter has got triggered
–
again.
 Get the device checked by Customer
Service.
Fuel tank empty
–
 Refill.
Water shortage
–
 Check water supply, check connec-
tions, clean water shortage safeguard.
Fuel pump is defective
–
 Replace fuel pump (Customer Service).
Fuel filter dirty
–
 Change fuel filter.
No ignition spark
–
 If device is in use and no ignition spark
can be seen through the viewing glass,
have device checked by customer ser-
vice.
Uneven spraying of fuel at the burner
–
nozzle
 Clean fuel filter.
Water scarcity safeguard does not
switch on - no flame
Water inlet is closed.
–
 Open the water supply.
Amount of water supply is too low.
–
 Increase water flow quantity.
Sieve blocked in the water shortage
–
safe guard.
 Clean sieve in the water shortage safe
guard.
Valves in the high pressure pump are
–
leaky or dirty.
 Inform Customer Service.

Customer Service

If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
24
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Accessories and Spare Parts
Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
–
you will find a selected list of spare parts
that are often required.
For additional information about spare
–
parts, please go to the Service section
at www.kaercher.com.
– 10
EN

Warranty