Set Heat Exchanger Menu - Extraflame LP30 User Manual

SET HEAT EXCHANGER MENU

This menu allows to program the start and end time of automatic cleaning of the heat exchanger. Cleaning takes place
mechanically via metal springs that clean the exchange pipes. By default the parameters are START 6:00 STOP 22:00 which mean
that cleaning is excluded from 22 to 6 in the morning.
Turn P2 to select the icon
Press P2 to confi rm
SET HEAT EXCHANGER
Turn P2 to select "
Confi rm, pressing P2
Turn P2 to select the desired parameter
Press P2 to enter modifi cation mode
Turn P2 to modify the value
Press P2 to confi rm and exit
If you wish to exit without memorising, press key P1
USER MENU
SET CLOCK
SET CHRONO
LANGUAGE
SET HEAT
EXCHANGER
MENU
"
SET HEAT
EXCHANGER
START .. 00:00
STOP .. 00:00
45