Specifications - Hobby King Turnigy 10XC User Manual

Table of Contents

Advertisement

Specifications

For battery type
Supported Cell Counts
Pack capacity
Input voltage
Input current
Power conversion
Per-Cell output voltage
Output current
Discharge current
Cont. output current
Cell balancing
Voltage calibration
Current calibration
Measurement accuracy Voltage resolution: 78 uV (16 bit)
Internal resistance
Serial data output
Data integrity
Cooling fan
Heat Sink
Output connector
LCD
Size
Firmware updates
Footnotes:
* Please note, for safety reasons, available charger current may be limited for certain battery types
and/or charging modes, e.g., non-balanced charge of Li
January 17, 2012 ver 1.0 www.revolectrix.com
Lithium Polymer, Lithium Ion, Lithium Manganese, A123 (LiFEPO4), NiCd,
NiMH, Pb packs
LiPo, LiIon, LiMg – 1s-10s balanced, 1s, 2s unbalanced
A123 (LiFEPO4) – 1s-10s balanced, up to 12s unbalanced
NiCd – up to 28 cells (non-balanced)
NiMH – up to 28 cells (non-balanced)
Pb (Lead) – up to 24V
100mAh to 65Ah (charge time limited to maximum of 12 hours)
10 to 32VDC; low voltage limit selectable from 10V – 28V in 0.5V increments
Up to 25A; can be limited to 1A to 25A in 0.5A increments
62.5kHz switcher operating at 80% - 95% efficiency
LiPo, LiIon, LiMg – 4.10V, 4.20, or 4.22V
A123 (LiFEPO4) – 3.65V
NiCd – 1.20V
NiMH – 1.20V
Pb (Lead) – 2V
100mA - 10A*, reverse polarity protected
1A per cell nominal (42W max) for storage discharging Li
400W @ +30V DC input
Resolution 78uV (16 bit) for 1s-10s Li or A123 LiFEPO4) balanced charging
calibration is to ± 6 mV
Charge current is factory calibrated on a 4A standard; calibration is to ± 1mA
Voltage tolerance: ± 6 mV
Charge current: ± 1%
Capacity added to pack: ±1%
0.1mohm voltage resolution allows accurate four point internal resistance
measurement of each cell
19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity
Checksum, CRC checking
Single, 8 CFM, 40mm diameter
Aluminum case, finned
2 x JST PA series, 6 position
2 line, 16 character, light grey/blue backlit
6.83" x 3.67" x 1.70"
Customer upgradeable using Firmware Update Utility Software
24

Advertisement

Table of Contents
loading

Related Products for Hobby King Turnigy 10XC

Table of Contents