Charging A Pack Or Packs - Hobby King Turnigy 10XC User Manual

To Exit the Main Menu and return to the Preset Menu: Press and hold the MODE button, then
release it when the display changes to this:
Note: You may press and hold the MODE button from any place within the menu to change menu
options or select Exit . Remember, any changes you make while in the Main Menu are saved the instant
you make the changes. If you hold the MODE button down longer, you'll see the previous Main Menu
options described above.
or
To Quick Start a Charge (Exit the Main Menu and begin charging in one operation if a pack is
connected): Press and hold the START/STOP button for one second. Details are provided in the
next section.

Charging a pack or packs

1. Before charging, pack(s) must be properly connected to the charger. See "Connecting packs to the
charger," earlier in this manual for details. Also, the correct preset must be selected for the packs
connected to the charger. See "Selecting a preset", earlier in this manual for details.
2. Press and hold the START/STOP button for one second to enter Charging Mode.
3. You will see the following screens in sequence:
*above screen will vary depending on what preset is being used
Note: because the 10XC supports automatic storage charge/discharge to 50%, the initial LCD
indication may show
4. While in Charge Mode, you can take the following actions:
To view pack and operating data: Press the MODE button repeatedly to cycle through the
following screens. (These examples assume two packs are being charged using one of the Dual
Channel presets; if one pack is being charged, only the top line may appear in some screens.)
[preset name]
[chem] [BAL] @ [charge current]
[chemistry] [BAL] [charge process]
[chemistry] [BAL] [charge process]
January 17, 2012 ver 1.0 www.revolectrix.com
Exit
Hold for More
PLEASE WAIT...
CHRGING LiPo BAL
MODE for info.
DSCHGING
for up to 10 seconds, even if a charge was initiated. This is normal.
C 1.00A 00:00:59
Supply=12.2V/ 3A
Ch1 Pack = 15.772V
Ch2 Pack = 15.761V
Charge current and charge time.
Supply voltage and input current.
Selected preset.
Preset's charging settings.
Chemistry and charge process (Fast
Charging, Balance Charging, etc.) in effect
for each channel.
Total pack voltage(s).
14