Performing Common Tasks; Selecting A Preset; Changing A Preset - Hobby King Turnigy 10XC User Manual

information and charging data.
Special Button Operation:
Press and hold MODE button while applying power to access and scroll the Options menu:
SPLY AMPS LOWS SUPPLY VOLTS
,
Menu to choose input amps limit and supply low voltage setting, alternate between DEFAULT or XH
balance wiring schemes, and set quiet charging (no speaker beeps during charging).

Performing Common Tasks:

Selecting a preset

At start up, press the MODE button to access and to scroll the Preset Menu and view/select pre-
defined, named presets and their settings, one at a time.
The preset displayed when you stop pressing the MODE button is the "selected" preset. Once the preset
is selected, you can change the parameters for this preset (see "Changing a preset") or begin charging by
pressing and holding the START/STOP button (for one second).

Changing a preset

You can change the charge parameters for the currently selected preset to match the characteristics of
the pack(s) you are charging.
At any time prior to starting a charge operation, press and hold the MODE button to access the
Main Menu options:
While watching the scrolling menu options, continue holding the MODE button, then, release it
only when you see the menu option you want. Now you may use the charger's menu to alter
parameters of presets on-the-fly. Note: Preset parameters are permanently saved the instant they are
changed.
1. Select the preset you want to change (see "Selecting a preset," above).
2. At this point, there are several things you can do:
To change the charge current:
a. Press and hold the MODE button, then release it when the display changes to this:
Note: If you hold the MODE button down longer, you'll see
below)
When you release the MODE button, you'll see the charge current of the selected preset:
b. Then:
Press the MODE button about once per second to increase current in 0.1A steps.
Press the MODE button quickly twice to increase current to the next whole Amp.
January 17, 2012 ver 1.0 www.revolectrix.com
NODE CONNECTOR
,
Choose Chg. Amps Choose Chemistry
,
Choose Chg. Amps
Hold for More
Choose Chg. Amps
Charge @ [current]
QUIET CHARGING
,
Show Help Screen
,
Choose Chemistry,
12
CHOOSE
Exit
, . Use the Options
Exit
, .
etc (described