Technical Data; Installation - Zanussi zfc649wap User Manual

Problem
The appliance does not
work at all. Neither cooling
nor lighting works.
Customer Service
If your appliance is still not working properly af-
ter making the above checks, contact the near-
est service centre.
To obtain fast service, it is essential that when
you apply for it you specify the model and serial
number of your appliance which can be found
either on the guarantee certificate or on the rat-
ing plate located on the external right side of
the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains
socket.

Technical data

Dimensions Height × Width × Depth (mm):
876 × 1611 × 665
Rising Time 31 hours

Installation

Positioning
Warning! If you are discarding an old
appliance that has a lock or catch on the
www.zanussi.com
Possible cause
Plug is not connected to the mains
socket properly.
Power does not reach the appli-
ance.
The appliance is not switched on.
There is no voltage in the mains
socket (try to connect another ap-
pliance into it).
2. Replace the lamp with one of the same
3. Connect the mains plug to the mains sock-
4. Open the lid. Make sure that the lamp
lid, you must ensure that it is made unusable to
prevent young children being trapped inside.
Important! The appliance shall have the plug
accessible after installation.
Solution
Connect the mains plug properly.
Try connecting another electrical de-
vice to the power outlet.
Switch on the appliance.
Call an electrician.
power and specifically designed for house-
hold appliances. (the maximum power is
shown on the lamp cover)
et.
comes on.
Further technical information are situated
in the rating plate on the external right side
of the appliance.
19