Table of Contents
Advertisement
1
General Information
The following should be considered when reviewing this user guide:
Attendant console keys can be assigned as Direct Station Selection/Busy
Lamp Field (DSS/BLF), Call Arrival or as additional central office lines
(CO Add-On Console.)
Refer to the Xen IPK Digital Telephone User Guide for additional
information on telephone operation.
All operational instructions assume Prime Line Pickup is assigned to
intercom dial tone, Ringing Line Preference is assigned, a Call
Appearance and Call Arrival key is assigned to all multiline telephones
and only a single tenant has been assigned in the system.
All access codes listed are standard; some may vary based on system
assignment.
Access to many features is based on system assignments. Not all features
may be available from your telephone.
The telephone display provides useful call processing information such
as trunk access, recall indication, feature confirmation, etc.
DSS/BLF LEDs
Telephone Status
Attendant message
Idle
In use
Hold
FWD All (DND)
2
3
ADD-ON CONSOLE LEDs
DSS/BLF Status
CO Line Status
Steady Green
Idle
Unlit
Incoming call
Steady Red
In use
Steady Red
(by the attendant)
Flashing Red
Other-use
Held call
- Your telephone
- Other telephone
1. DSS keys (direct station
selection) or CO keys
(Central Office Lines)
2. Status Indicators
3. Dedicated Feature keys
LED Indication
Unlit
Rapid Flashing Red
Steady Green
Steady Red
Slow Flashing Green
Slow Flashing Red
1
Advertisement
Table of Contents
