Conference Bridge Setup
Before using the Multiline Conference Bridge feature, passwords must
be assigned. It should be noted that the supervisor should perform these
procedures.
SETTING SUPERVISOR PASSWORD
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the default
Supervisor Password (0000#).
Follow the voice prompt and enter the setting verification mode.
Then enter setting change mode.
Follow the voice prompt to change Supervisor Password (4-8 digits).
SETTING CONFERENCE 1 AND/OR CONFERENCE 2 PASSWORDS
Set the Supervisor Password, if necessary.
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the Supervisor
Password and #.
Skip the steps by pressing
available for conference 1 or conference 2.
Follow the voice prompt and set the conference 1 or the conference 2
password (4-8 digits).
RECORD CUSTOMISED GREETING
Set the Supervisor Password, if necessary.
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the Supervisor
Password and #.
Press
to skip the setting verification mode.
*
Press # to change system settings.
Skip the steps until Customised Greeting option is played.
Follow the voice prompt and record a new Customised Greeting.
10
until the Conference Setup mode is
*