AccuBoom Setup
1. Touch the Booms Area.
2. Enter Look-Ahead values and touch Next.
3. Select the booms for AccuBoom automatic boom section control and touch
Next.
4. Select the desired aggressiveness setting and touch OK.
or
Note:
The aggressiveness factor setting uses a percentage of the look-ahead
times to adjust the responsiveness of the AccuBoom system.
If a SwitchPro is connected to the Viper Pro, AccuBoom control is
controlled by the switch position on the Switch Box. Review the SwitchPro
instruction guide for more information.
17
or