Starting A New Standard Job - Raven Viper Pro Quick Reference Manual

Starting a New Standard Job

1. Select Menu, Start Job, then New Job.
2. Type in a Job Name, and enable appropriate application options to use during
the job. Select a Swath Pattern (if guidance is enabled), and enter the
number of products (if product application is enabled).
Note: If none of the job options are enabled, touch the OK button on the New Job
screen to begin the job.
3. If products should be applied using a product chain, enter the number of
product chains to be used (see the Installation and Operation Manual for more
information on setting up and using the product chaining feature.
10