Invisible Zipper Foot; 1/4" Foot - Brother 884-T78 Operation Manual

Invisible Zipper Foot

Attach invisible zipper foot.
1
Align zipper with fabric. Mark
2
the base of the opening
approximately 2 cm (3/4 inch)
above the end of the zipper.
Baste the zipper position.
3
Separate the seam allowance.
4
With the zipper mounted, baste
5
just the seam margin on one
side of the zipper.
Close the zipper and baste the
6
other side of the zipper.
Remove the basting at the
7
zipper position.
Fit the zipper teeth into the
8
presser foot groove, guide the
teeth to prevent them from
coming out of the groove, and
sew to the base of the opening.
When sewing with the teeth to
✽
the right, the left side of the foot
should line up with the left teeth
of the zipper.
22
Teeth
Baste
Slide
Base of
Opening
2 cm
Basting Basting

1/4" Foot

Sewing machine settings:
●
Stitch length = 2 - 2.5 mm
• Sew a consistent seam
allowance (1/4", 6.4 mm) when
piecing together a quilt.
• Use guides (mark) to begin,
end, or pivot 1/4" (6.4 mm) from
edge of fabric.
• Accurately top stitch 1/8" (3.2
mm) from seam.
Seam allowance
(1/4", 6.4 mm)
Align this
mark with
edge of
Beginning fabric
of
Align this
stitching
mark with
edge of
End of
fabric
stitching
Top of fabric
Seam
(1/8", 3.2 mm)