Brother 884-T78 Operation Manual page 15

� Place the thread end so that it does
not protrude from the bobbin.
While holding the end of the thread,
7
press on the foot controller for a
few seconds. Once enough thread
has wound itself around the bobbin
to hold itself in place, release the
foot controller and trim the excess
thread.
Cut thread and remove bobbin.
A
Press down
Pedal
Controller
� Pressing down on the controller
harder increases the winding speed.
Start winding the bobbin again by
8
pressing down on the foot controller.
Stop winding process when bobbin
9
is full. Remove your foot from the
foot controller.
Bobbin Winding Clutch
Manually move bobbin winding
0
clutch back to original position.
13