Fabric Separator (for
joining lining to fabric)
Use this technique for sewing
velvet and lining together.
Raise needle and foot.
Move separator so it sits under
Make sure it is lined up so that
the needle passes through the
slot of the separator without
hitting the plate itself.
Secure liner plate in place with
lining plate screws.
Set pressure of sewing feet
and feed position to pin feeding
Pull thread until lower needle
Sew 2-3 reinforcement stitches.
When not using separator, it
can be swung off to the side as
illustrated in drawing.
• Lighten the presser foot pressure slightly when using the fabric separator.
• Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them
from interacting with one and other before the needle sews them together in a perfect seam.
Tighten the screw securely
with a screwdriver since it
might otherwise loosen due to
Turn adjustment screws as arrow
images suggest to set the position of
the Seam Guide foot.