Color Matrix - NEC XL-6500 User Manual

Sync System
This function is used to select the detection method of the sync
signal for an RGB signal.
Use the CURSOR or
or "TRI-SYNC" and press ENTER.
• When "AUTO" is selected, the sync type will be displayed.
• Select "AUTO" in normal operation.
On-screen display
• AUTO --------- Detects automatically a composite or HV
separate sync signal.
• G-SYNC ------ Selects sync on green signal.
• TRI-SYNC ---- Selects a tri-sync signal (HDTV signal).
Sync Termination
This functions is used to select the impedance of the sync signal.
Use the CURSOR or
then press ENTER.
NOTE: The default setting is "75
This should be "75 " for normal use. Select the "Hi-Z" when
inputting a TTL signal.
Scale Mode
This function is used to enable or disable to enlarge or reduce the
image.
Use the CURSOR or
press the ENTER button. To take effect, press and hold CTL then
press ZOOM/PAN; to cancel it, do the same again.
Input Sig. Size
This function is used to specify the picture size of input signal.
or
Use the CURSOR
Use the CURSOR or
Output Sig. Size
This function is used to specify the picture size of output signal.
or
Use the CURSOR
Use the CURSOR or

Color Matrix

This function is used to select the mode to match the output
format of an HDTV or DVD signal.
Use the CURSOR or
and press the ENTER button.
button to select "AUTO", "G-SYNC",
button to select " 75 " or "Hi-Z",
".
button to select the desired mode and
to adjust the horizontal size.
to adjust the vertical size.
to adjust the horizontal size.
to adjust the vertical size.
button to select the appropriate mode
35
3.OPERATION