Source Name; Direct Key - NEC XL-6500 User Manual

The following items can be set:

Source Name

To change the source name or input a new source name by
selecting one character at a time with the INPUT buttons 1
through 10 and by moving the cursor with the CURSOR button.
Only after completely finishing the selection of the characters,
press ENTER.
• If you have made an error, use the CURSOR button and reenter
the correct letter or number.
To delete one character, move the highlight to the character to be
deleted and then press the NORMAL button.
To delete all the entered name, hold down the CTL button then
press the NORMAL button.
• The above is the same procedure of the signal entry. See To
change the source name or input a new source name by select-
ing one character at a time with the INPUT buttons 1 through
10 and by moving the cursor with the CURSOR button. Only
after completely finishing the selection of the characters, press
ENTER.
To delete one character, move the highlight to the character to be
deleted and then press the NORMAL button.
To delete all the entered name, hold down the CTL button then
press the NORMAL button.
• The above is the same procedure of the signal entry. See pages
45 and 46 for more details.

Direct Key

Use the CURSOR buttons to assign settings of a source to each of
the 10 INPUT buttons with CTL.
33
3.OPERATION