Sharp XEA201 Parts And Their Functions page 13

_RCPT/PO_
3. Press
This key toggles the receipt printing from ON to OFF or OFF to ON
Press the _RCPT/PO_
there are more than 30 items in the sale, the receipt will print the total of the sale only.
How shall I know when it is time to replace the batteries?
The XEA201 has a "Low Battery" symbol which is:
is:
When the "Low Battery" symbol is displayed, you should replace the batteries with new ones within two
days of the low battery symbol being first displayed. Failure to do so will mean that the XEA201 might
lose its programmed settings and any sales data in the event of a power failure.
When the "Flat Battery/No Battery" symbol is displayed the battery must be replace immediately. If not
the XEA201 will lose all its programmed settings, and any sales data if the power fails or is turned off.
To replace the batteries, do the following.
1. Make sure the XEA201 is plugged in.
2. Remove the printer cover.
3. Open the battery compartment cover next to the paper roll cradle, and remove the old batteries.
4. Install three (3) new alkaline batteries (AA size), in the battery compartment. Be sure the positive
and negative poles of each battery are facing in the correct direction. When they are installed
correctly, the low battery or no battery message will disappear.
5. Close the battery compartment cover.
6. Replace the printer cover.
XEA201 Frequently Asked Questions
key when in REG mode to print a receipt after the sale if required. If
, and a "Flat Battery/No Battery" symbol which
Page 13 of 17