Miscellaneous - Medisana FTO 76073 Manual

4.1 Explanation of display symbols
and error messages
Display Description
SWITCHING ON
All symbols are displayed for 2 seconds.
Memory Function
Automatic display of the last reading for
3 seconds.
The display remains illuminated for 2 seconds.
No tone.
SELF-TEST
The symbol "Err" indicates an error.
You will hear three short tones and the display
will remain illuminated for 5 seconds.
The thermometer switches off after 60 seconds.
READY FOR READING
You will hear a short tone.
The °C or °F symbol flashes.
Give the START button
the reading.
READING COMPLETED
You will hear a long tone.
The display remains illuminated for 5 seconds.
The crossed-out ear symbol is displayed if the
result is not within the temperature range 32 °C
to 42,2 °C.
If the result is greater than or equal to 37,5 °C
(99,5 °F), the fever alarm will be activated
(10 short tones).
FURTHER READINGS
When the °C or °F symbol starts to flash again,
the thermometer is ready to take the next
reading. The unit switches off automatically
after 60 seconds if no further buttons are
pressed.
The temperature measured is too high.
"H" appears in the display when the tempera-
ture reading taken is above 100 °C or 212 °F.
The temperature measured is too low.
"L" appears in the display when the tempera-
ture reading taken is below 0 °C or 32 °F.

4 Miscellaneous

a short press to start
GB
15