Manitowoc S Model Installation Manual page 46

S model quietqube ice machines with cvd technology

Hide thumbs Also See for S Model:

Table of Contents

Leak Check the System

Leak check the new line set connections at the ice machine

head section, condensing unit and S trap as well as all factory

joints throughout the entire system.

Disconnect power to the CVD condensing unit. Place the

ICE/OFF/CLEAN toggle switch into the ICE position. This allows

the low side and high side pressures to equalize.

Place the ICE/OFF/CLEAN toggle switch in the OFF position.

Connect power to the CVD condensing unit and allow system to

pump down.

Table of Contents