Table of Contents
Advertisement
3
Award BIOS Setup Utility
3.1.6.8 PCI Slot 1&5 Use IRQ to PCI Slot 4 Use IRQ
By default, an IRQ is automatically assigned to the PCI devices that
are installed in the PCI slots.
If a PCI device has not been assigned an IRQ, you must manually
assign an IRQ for the device. During system boot-up, you will see
"NA" for the device that does not have an IRQ assigned.
77
Advertisement
Table of Contents
Need help?
Do you have a question about the PE11-TC and is the answer not in the manual?