DFI PE11-TC User Manual page 51

field. Also, disable this field if you are installing or running cer tain
operating systems like Windows
system may not install nor work.
3.1.2.2 CPU L1 & L2 Cache
These fields speed up the memory access. The default value is
enabled.
3.1.2.3 CPU L2 Cache ECC Checking
The processors suppor ted by the mainboard come with built-in
Level 2 cache. By default, ECC is enabled to check the Level 2 cache.
If you are not using this function, set this field to Disabled.
3.1.2.4 Quick Power On Self Test
This field speeds up Power On Self Test (POST) after you power on
the system. When Enabled, the BIOS will shor ten or skip some check
items during POST.
3.1.2.5 First Boot Device, Second Boot Device, Third Boot Device and
Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according to
the sequence of the drive selected. Set "Boot Other Device" to
Enabled if you wish to boot from another device.
3.1.2.6 Swap Floppy Drive
When this field is enabled and the system is booting from the floppy
drive, the system will boot from drive B instead of drive A. When
this option is disabled and the system is booting from the floppy
drive, the system will boot from drive A. You must have two floppy
drives to use this function.
Award BIOS Setup Utility
® 98/2000/ME/XP or the operating
3
51