Operation Of The Falk Navigation; Starting The Navigation Device For The Fi Rst Time; Working With The Menu Of The Falk Navigator; Using The Keypad - Text Entry - FALK Flat XL Quick Start Manual

4. Operation of the
Falk Navigation
Software:
The navigation software incl. the associated map
material is preinstalled in the internal memory of the
navigation system and/or on an SD card which is also
supplied. You will again find this data (software, maps,
POIs, speakers and cities) and, depending on the
product, further data as well on the enclosed
Content + Falk Navi-Manager CD/DVD.
You can find detailed manuals on the navigation soft-
ware on the enclosed Content + Falk Navi-Manager
CD. To make the manuals available, you must install
the Falk Navi-Manager (cf. Chapter 6). Under Start/
Programs/Falk you then have access to the manuals
which are supplied.
Starting the navigation device for the
first time
When the device starts up for the first time, it searches
for a satellite link, and it may take a few minutes for
the device to find your current position. It is important
here that you are in an open space and not inside an
enclosed building.
This period of time is only required when the device
is started up for the first time and is much quicker the
next time that the navigation software is started up.
Working with the menu of the Falk
Navigator
When you first switch on the device, you are automati-
cally directed to the main menu.
The main menu consists of 3 screens. You can scroll
between these screens with the aid of the blue arrow.
By tapping on the different buttons you can select
them, open submenus or display corresponding infor-
mation. You control the complete menu of the Falk
Navigator by touching the surface of the screen.
EN
28
When you are on the map view screen (e.g. during navi-
gation), use your finger or a blunt object (e.g. stylus pen)
to tap on the map or on the button at the top left-hand
corner of the screen to get to the main menu.
Tap in the main menu on the Map button to switch to
the map view screen.
Using the keypad – text entry
As you operate your navigation device, you will repeat-
edly need to enter texts (e.g. place names, street
names, etc.) via the keypad. All characters, including
special characters and digits, can be used.
You get to the text entry screen by tapping the Desti-
nation entry button on the main menu and then the
Address button.
Touch the letter you want on the screen. This will be
selected and will appear in the entry field.
Delete button to delete letters or numbers which
you have entered incorrectly in the entry field.
Space bar
Touching this button will take you to the block
of digits. You can then enter numbers.