Wiring Diagram - NEC MultiSync LT81 User Manual

Wiring Diagram

Document Camera
VCR, Laser Disk Player or DVD Player
DVD Player with Y/Cb/Cr output
Signal cable (supplied)
To mini D-Sub 15-pin connector on the Projector
IBM VGA or Compatibles
PS/2 mouse adapter
(supplied)
Remote Control Guideline
1. Plug the serial cable with the remote mouse receiver into your computer's mouse port and restart your computer to gain remote mouse
control.
2. When using the remote control's built-in infrared mouse on a laptop computer, the laptop's mouse, trackball or trackpad will be disabled.
Disconnect the infrared receiver and restart your computer to regain trackball or trackpad mouse control.
3. If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management
software. If you accidentally hit the OFF button on the remote control, wait one full minute and then press the ON button to resume.
INSTALLATION
To video, S-video, and audio
inputs on the projector
To RGB input on the projector
Remote Mouse
Receiver
INPUT VIDEO INPUT
(
S-VIDEO VIDEO L MONO
OUTPUT RGB INPUT
REMOTE
CONTROL RGB AUDIO
Pin adapter for Macintosh
(supplied)
Macintosh or Compatibles
Mac ADB adapter
(supplied)
)
-R-AUDIO
PC CONTROL
OUTPUT OUTPUT
RGB AUDIO
(Desk top type)
Remote Mouse
Receiver
43
44