Power Menu(Projector Control Icons) - NEC MultiSync LT81 User Manual

Power Menu
Provides access to Lamp Usage information, the Auto Start, Power Management and On-
screen Mute features. Use the "Select" button on the projector cabinet or ( ) ( ) buttons on
your remote control to access a submenu. Then press "Adjust" (+) or (–) to choose a specific
option.
Lamp Usage
This tells you how long the lamp has been in operation. It is recommended that you replace a
lamp after 1000 hours of service. After you install a new lamp, select this icon and press and
hold the "Power On" button on the remote control for ten seconds to reset the lamp clock back
to zero.
NOTE: The projector will turn off and go into stand by mode after 1100 hours of service. If this
happens, press the "Power Off" button on the remote control for ten seconds to reset the lamp clock
back to zero. Do this only after replacing the lamp.
Auto Start
Turns the projector on automatically when the main power switch is turned on. This elimi-
nates the need to always use the "Power" button on the remote control or projector cabinet.
Press (+) to turn this feature on and (–) to turn it off.
Power Management
When "Power Off" is on and there is no video input for five minutes or more, the projector
will automatically turn itself off. Press the (+) to turn this feature on and (–) to turn it off.
On Screen Mute
Use the mouse pad (+) button to turn off the On Screen Mute ; (–) to restore it.
The On screen Mute feature keeps the menu from displaying when the projector is turned
on or when switching inputs.
OPERATION
67
68