Remote Control Features - NEC GT5000 User Manual

v Remote Control Features
OFF
2
5
-
BS
6
ADJUST
7
PICTURE
ABC
1
JKL
4
9
STU
7
10
,.
0
12
TEST
13
POSITION
17
LENS
SHUTTER
20
PICTURE
KEYSTONE AMPLITUDE ENTRYLIST
21
22
24
FOCUS
26
CTL
POWER
ON
MENU
ADDRESS
+
ENTER
IMAGE
WHITE BAL.
PROJECTOR
GHI
DEF
2 3
MNO PQR
5 6
VWX YZ/
9
8
UNDO CANCEL
INFO. HELP
PIXEL AUTO
MUTE
SOUND OSD
R G B
MAGNIFY
+ +
- -
ZOOM
LENS
1. POWER ON
Press and hold this button for a minimum of two seconds to
turn on the projector when the main power is supplied and the
projector is in standby mode or idle mode.
2. POWER OFF
Press and hold this button for a minimum of two seconds to
turn off the projector.
1
3. MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display
3
the Remote Control ID dialog box to specify the remote control
ID. See page 7-2.
4
4. ENTER
Executes the menu selection and activates items selected from
the menu. When the slider or dialog box is displayed:
8
Pressing this button confirms adjustments/setting and returns
to the previous menu display.
5. Select (Up/Down/Left/Right)
: Use these buttons to select the menu of the item you
wish to adjust.
When no menus appear, these buttons work as a volume
control.
: Use these buttons to change the level of a selected
menu item.
A press of the
11
Pressing and holding CTL, then pressing
14
Back Space key in the entry screen.
Pressing and holding CTL, then pressing this button moves
15
the menu, slider, toolbar or dialog box.
16
6. ADJUST WHITE BAL.
Press to display the Picture Management screen.
18
19
7. ADJUST PICTURE
Press to display the Picture adjustment screen. Pressing this
button sequentially selects adjustment screens.
23
8. IMAGE/PROJECTOR
Press to display the Image Option screen. Pressing this button
sequentially selects Image Options screens.
25 While pressing and holding CTL, pressing this button rotates
Projector Options screens.
9. Source / Input
Press to select input or to name a signal.
1 Selects RGB 1 input.
2 Selects RGB 2 input.
3 Selects DVI (DIGITAL) input.
4 Selects VIDEO input.
5 Selects S-VIDEO input.
6 Selects Viewer input
7 Selects LAN input
8 Selects OPTION SLOT 1* (available for optional SDI board)
9 Selects OPTION SLOT 2* (available for optional SDI board)
0 Sequentially selects: RGB1 (VIDEO) → RGB1 (S-VIDEO) .
* This button toggles between input 1 and 2.
NOTE: While pressing and holding CTL, pressing this button switches to the
selected signal found in the Entry List.
1-10
1. Introduction
button executes the selection.
button works as a