Making The Most Out Of The Viewer Function - NEC GT5000 User Manual

NOTE:
• To use the Viewer, first you need to create presentation materials on your PC
using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector
User Supportware CD-ROM. For installation, see "6- b Software Installation".
For creating presentation materials, see the Slide show function on the on-line
manual of the Dynamic Image Utility 2.0.
• Selecting Viewer sets the audio input for DVI input.
z Making the Most out of the Viewer Function
Features
You can view presentation data, capture, and play images on the
projector. A PC card is used to view presentation data prepared
on the computer and to capture and play images projected with
the projector.
The Viewer feature allows you to view slides stored on a PC
memory card (referred to as PC card in this manual) on the pro-
jector. Even if no computer is available, presentations can be
conducted simply with the projector. This feature is convenient
for holding presentations at meetings and in offices, as well as
for playing images taken on digital cameras.
Easy to use
• Presentations can be started immediately simply by inserting a
PC card (not supplied)
• Easy slide switching
• Remote control operation
• Jumping to list of slides or any specific slide
High quality images
• High resolution up to 1024 x 768 dots
• 24-bit full color playback
• Viewing of digital camera images
Simple utility software (for computer)
• Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000
• Slides can be created by capturing the currently displayed image
• Control screen for displaying lists of slides and editing
* Microsoft, Windows and PowerPoint are registered trademarks of
Microsoft Corporation.
Inserting and Removing a PC Card
NOTE:
• Do not try to force the PC card into the slot.
2
PC CARD 1
NOTE: When using two PC cards, do not insert both PC cards into the two PC card
slots simultaneously. Doing so may cause projector malfunction such as shutting
down. Each PC card must be inserted slowly one at a time.
Inserting the PC Card
• Hold the PC card horizontally and insert it slowly into PC card slot
1 or 2 with its top facing up.
PC card (not supplied)
Removing the PC Card
Press the eject button slowly. The eject button card pops out a
little. Press the eject button slowly again. Grasp the edges of
the PC card and pull it out. Push and insert the eject button
fully until it stops.
NOTE: Do not eject the PC card while its data is being accessed.
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into
the PC card slot in a specific direction. It cannot be inserted
backwards or upside-down. Attempting to force it into the slot
in the wrong direction may break the internal pin and damage
the card slot. Refer to the PC card's operating instructions for
the proper direction of insertion.
PC Card Type
The PC Card slot accepts PCMCIA Type II only.
5-2
5. Using the Viewer
U S
B
( M O
U S E
/H U
B )
U S
B 2
( P C
)
P C
C A
R D
P C
C O
1
N T
R O
L
IN
L A
N
O U
T
R E
S C
M O
T R
T E
IG G
E R 1
R E
M O
T E
2
IN
O U
T
A C
IN
U S
B
(
M O
U S E
/H U Eject button
B
)
U S
B
( 2
P C
)
P C
C A
R D
P C
C O
N T 1
R O
L
IN
L A
N
O U
T
S C R E
T R M O
IG G T E
1
E R
R E
M O
T E
2
IN
O U
T
A C
IN