Lan Mode - NEC GT5000 User Manual

Status
Displaying Current Status of Link Mode
When selecting the tab "Status", you will get the following dia-
log box.
Master ID ................. Indicates the Master projector
Status ...................... Indicates the status of the master pro-
jector
Connected PJ .......... Indicates number of connected slave
projectors
Slave No .................. Indicates serial number of the slave pro-
jector
ID ............................. Indicates ID of a slave projector
Status ...................... Indicates the status of the slave projec-
tor
Reconnect button .... Confirms connection of all linked projec-
tors
Status items
Running ................... The projector is now working
Cooling Lamp .......... The fan is now cooling the lamp
Standby ................... The projector is in stand-by or idle.
Communication Error ... A communication error has occurred
Connecting .............. The projector is now verifying for con-
nection
Error Standby .......... An error caused the projector to enter
the stand-by mode.

LAN Mode

This feature allows you to set various setting items when the
projector is used on your network.
Consult with your network administrator about these settings.
NOTE:
• Connect an Ethernet LAN cable to the LAN port (RJ-45) of the projector for net-
work connection.
• NEC's optional wireless LAN card is available. For more information on inserting
or ejecting a LAN card, see page 5-2.
• Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are inserted
into both PC card slots, the first inserted one is effective.
• The standard built-in LAN feature and a commercially LAN card are available for
network connection, but only one can be used at a time (mutual exclusion).
CAUTION: Make sure that the LAN card is removed during
Standby mode (NOT Idle mode) or with the main power off. Fail-
ure to do so may cause damage to the data on your PC card.
Status
LAN Card
This option selects to use either LAN feature between the stan-
dard LAN port (RJ-45) and an optional LAN card inserted in
the PC CARD slot.
Projector Name
Specify a unique projector name. Press
ware keyboard and type in. Up to 16 alphanumeric characters
can be used.
IP Address ............... Indicates the IP address of the projec-
Subnet Mask ........... Indicates the subnet mask of the projec-
MAC Address .......... Indicates the MAC address of the LAN
Advanced ................ Displays the IP Address setting window.
NOTE: Once you have selected "OK" on the Advanced screen, you cannot cancel the
changes using "Cancel" on the LAN Mode screen.
8-19
8. Using On-Screen Menu
to display the soft-
tor.
tor.
card.