NEC GT5000 User Manual page 105

Source Select: This switches the input connector of the projector.
RGB1 ...................... Switches to the RGB 1 connector.
RGB2 ...................... Switches to the RGB 2 connector.
DVI(DIGITAL) ........... Switches to the DVI connector.
Video ....................... Switches to the Video connector.
S-Video ................... Switches to the S-Video connector.
Viewer ..................... Switches to the Viewer.
LAN ......................... Switches to a LAN signal.
Slot 1-1 .................... Switches to input 1 of the Slot 1.
Slot 1-2 .................... Switches to input 2 of the Slot 1.
Slot 2-1 .................... Switches to input 1 of the Slot 2.
Slot 2-2 .................... Switches to input 2 of the Slot 2.
RGB1 (VIDEO) ........ Switches to Video of the RGB1 connec-
tor.
RGB1 (S-VIDEO) .... Switches to S-Video of the RGB1 con-
nector.
Projector Status: This displays the condition of the projector.
Remaining Lamp 1/2 Time
................................ Displays the remaining life of the lamp
1/2 as a percentage.
Lamp 1/2 Hour Meter ... Displays how many hours the lamp 1/2
has been used.
Projector Usage ...... Displays how many hours the projector
has been used.
Filter Usage ............. Displays how many hours the filter has
been used.
Error Status ............. Displays the status of errors occurring
within the projector.
Refresh .................... Updates the display of the following con-
ditions.
10-12
10. Appendix