Table of Contents
Advertisement
Remote Control Features
NOTE: If you are using a Macintosh computer, you can click either the
right-click or left-click button to activate the mouse.
NOTE: If any one of the buttons is pressed and held for 60 seconds or
more, the button operations will cease to operate. This is not a mal-
function, rather it is a feature used to prolong battery power. To cancel
this feature, press any one of the buttons other than the SELECT but-
ton.
1. Infrared Transmitter
Direct the remote control toward the remote sensor on the pro-
jector cabinet.
2. LED
Flashes when any button is pressed.
3. Power ON Button
If the main power is applied, you can use this button to turn
your projector on.
4. Power OFF Button
If the main power is applied, you can use this button to turn
your projector off.
NOTE: To turn off the projector, press and hold the POWER OFF but-
ton for a minimum of two seconds.
5. VIDEO Button
Press this button to select a video source from a VCR, DVD
player, laser disc player or document camera.
6. S-VIDEO Button
Press this button to select an S-Video source from a VCR.
7. RGB Button
Press this button to select an RGB source from computer or
component equipment connected to your RGB port.
8. Auto Adjust Button
Use this button to adjust Position-H/V and Pixel Clock/Phase
for an optimal picture. Some signals may not be displayed cor-
rectly, or in some cases it may take some time for a source to
switch between sources.
9. Menu Button
Displays the menu.
10. Select LM
(mouse) Buttons
When you are in the Computer mode, these buttons work as a
computer mouse.
When you are in the Projector mode, which is indicated by
lighting the PJ button:
LM :
Use these buttons to select the menu of the item you
wish to adjust.
:
Use these buttons to change the level of a selected
menu item.
11. Enter (Left click) Button
When you are in the Computer mode, this button works as the
mouse left button.
When you are in the Projector mode, which is indicated by
lighting the PJ button:
Use this button to enter your menu selection. It works the same
way as the "Enter" button on the cabinet.
Remote Control
4
5
6
7
10
11
14
15
12. CANCEL Button
When you are in the Computer mode, this button works as the
mouse right button.
When you are in the Projector mode, which is indicated by
lighting the PJ button:
Press this button to exit "Menus". It works the same way as the
"Cancel " button on the cabinet.
13. PJ Button
Press this button to switch the Select, Cancel, and Enter but-
tons between the Projector mode (lit red) and the Computer
mode. Press this button or any one of the Power ON/OFF, Menu,
Help and Magnify buttons to switch to the Projector mode and
the PJ button lights red. To switch back to the Computer mode,
press the PJ button again.
14. HELP Button
Provides information about the current signal and the status of
the projector.
15. Magnify Button
Use this button to adjust the image size up to 400%.
16. Freeze Button
This button will freeze a picture. Press again to resume mo-
tion.
17. Picture Mute Button
This button turns off the image and sound for a short period of
time. Press again to restore the image and sound.
18. Volume Button
Press (+) to increase the volume and (–) to decrease it.
NOTE: The default is the Computer mode, which allows you to use the
Select, Cancel, and Enter buttons as your computer mouse. When the
Power ON/OFF, MENU, HELP and MAGNIFY button is pressed, the PJ
button lights red to indicate that you are in the Projector mode. If no
buttons are pressed within 10 seconds, the light goes out and the
Projector mode is canceled.
E-12
1
2
OFF
ON
3
POWER
VIDEO S-VIDEO
RGB
AUTO ADJ.
8
9
SELECT
12
PJ
13
HELP
FREEZE PIC-MUTE
17
MAGNIFY
16
VOLUME
18
Advertisement
Table of Contents
