Regency HZ42STE-NG10 Owners & Installation Manual page 43

HZ42STE
8. Install on burner, use template to determine the fi nal position
3
Diagram 6
919-289
9. Repeat the procedures in Steps 7 and 8 to assemble and install Logs
5 + 6 on the other side of the unit
10. Install Log 7 - line up pin locator with pin on Log 3 as shown below.
Line up other end of Log 7 with template.
11. Install Log 8 - line up pin locator with pin on Log 5. Line up other end
of Log 8 with template.
4
12. Place lava embers/rocks on glass - ensure rocks do not block pilot.
Do not place lava rocks/embers too close to logs as this may cause
carboning.
13. Carefully remove paper templates.
14. Adjust aeration, see unit manual for setting.
15. Reverse Steps 2 and 1.
HZ42STE - Final Install
Diagram 8
2
installation
7
Diagram 7
Regency Horizon™ HZ42STE-10 Gas Fireplace
|
43
| 43
09/11/13