Chapter 5 Operator Panel; Operator Panel Features; Indicator Lights - NEC SuperScript 4600N User Manual

CHAPTER 5
OPERATOR PANEL
O
VERVIEW
The printer's Operator Panel allows you to read printer
messages and change printer settings directly at the printer.
The Operator Panel on the SuperScript 4600N consists of
eight buttons and six indicator lights.
This chapter describes
• Operator Panel features, including indicator lights, the
message display, and buttons
• Using the Operator Panel menu tree
• Important tasks you can perform using the Operator
Panel and menu tree settings.
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Previous Next Select
O P
PERATOR ANEL

Indicator Lights

The indicator lights on the Operator Panel help communicate
the status of the printer.
Light Mode
Power On Printer power is on or in POWER SAVE
mode.
(Green) Off Printer power is off.
Warning On Call for service (see page93).
(Red) Off Normal state, no action is required.
Blinking The printer has a problem. See the
message display. If there is no
message, call for service (see page93).
Online On Printer is online and ready to print.
(Green) Off Printer is offline or in menu mode.
Blinking Printer is warming up.
Data On Print buffer contains data.
(Orange) Off Print job has ended or print buffer has
been cleared by pressing the Feed
button.
Blinking Data is being sent to the printer.
OHT On Media type is set to Over Head
Transparency (OHT).
(Green)
Off Media type is not set to OHT.
Label On Media type is set to Thick.
(Green) Off Media type is not set to Thick.
F
EATURES
Status
51