Feature
Out of range
Cordless Headset LEDs
There are two LEDs associated with the cordless headset:
• A blue LED on the headset indicates the headset status
• A green LED in the headset charging cradle indicates battery status
LED Color
LED
State
Blue
Solid
(on headset)
Blinking
Winking
Solid for 2
seconds
Off
Green
Solid
(on cradle)
Blinking
Winking
Off
Blinking: LED is On and Off for equal amount of time
Winking: LED is On for a short period of time and Off for a longer period
Function
Repetitive 3-pitch tone until you are back in range.
Note: If you are out of range for more than 10 seconds,
any call that is in progress is dropped and not
recovered.
Indicates
Headset mic is muted
Headset is in pairing mode
Active audio path between Headset and Module
•
Pairing successful OR
•
New battery installed
•
No audio path between Headset and Module OR
•
Battery is dead
Battery is fully charged
Battery is charging. Note: It is normal for the headset LED to
cycle between blinking and solid as battery charge is
maintained.
Indicates low voltage when headset is uncradled
When headset is cradled, indicates battery is not charging.
91
5330/5340 IP Phones – User Guide