Copy Or Cut An Outlined Section - Brother HL-L9200CDW Web Connect Manual

Home > About Outline, Scan, and Copy or Cut
Documents > Copy or Cut an Outlined Section

Copy or Cut an Outlined Section

Related Models: DCP-L8400CDN/DCP-L8450CDW/MFC-L8600CDW/MFC-L8650CDW/MFC-L8850CDW/
MFC-L9550CDW
1. Using a thick red pen or marker, outline the areas of the document that you want to copy or cut.
2. Load your document.
3. Swipe left or right, or press d or c to display the More screen.
4. Press Web.
• Occasionally, updates or announcements about Brother Web Connect's features will be displayed on
the LCD. Read the information, and then press OK.
• If information regarding the Internet connection is displayed on the machine's LCD, read the information
and press OK. If you want to display this information again, press Yes.
5. Swipe left or right, or press d or c to display Apps, and then press it.
6. Press Outline&Copy.
7. Press Copy outlined area or Cut outlined area.
8. If information regarding Copy outlined area or Cut outlined area is displayed, read the information
and press OK. If you want to display this information again, press Yes.
9. The Copy Settings screen will be displayed. Change your Print Quality or your Paper Size, if needed.
10. Press OK.
The machine starts printing. If you are using the machine's scanner glass, follow the LCD instructions to
complete the printing job.
11. When the machine finished printing, press OK.
12. Press .
Related Information
• Outline, Scan, and Copy or Cut Parts of Your Documents
> Outline, Scan, and Copy or Cut Parts of Your
38