Troubleshooting; Technical Data - Caffitaly System S05 Instruction Book

PROBLEM
No coffee comes out.
Warning light D blinks
RED.
The coffee is not hot
enough.
The lever cannot be
lowered.
Warning light E is lit
steadily in RED.
When a button is pressed
to dispense coffee, the
machine seems to work
but then stops without
dispensing any coffee,
or only dispenses a tiny
amount.
Coffee is dispensed very
slowly, and is of poor
quality.
See the data plate on the base of the
machine.
Max. 15 bar
< 70dB A
About 6 kg
2 litres
Ambient temperature: 10°C - 40°C
220 mm
English

Troubleshooting

POSSIBLE CAUSE
The water tank is empty.
- Cold cups / espresso cups.
- Scale build-up in machine.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
Heating problems.
Incorrect quantity
programming.
Button C was used with an
espresso capsule.

Technical data

340 mm
SOLUTION
Fill the tank with fresh water. Press
a button to refi ll the circuit. When
the buttons remain steadily lit, the
appliance is ready for use.
- Preheat the cup.
- Descale the machine.
- Empty out the used capsule drawer.
- Remove the used capsule.
Switch the machine off and on again.
If the problem persists, take the
machine to an Authorised Service
Centre.
Reprogram the quantity associated
with that button.
See ch. "Programming the quantity
of coffee in a cup".
Use buttons A or B.
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
320 mm
21