Denon AVR-X5200W Owner's Manual page 264

Contents Connections
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2 / ZONE3
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see "Using the keyboard screen" (v p. 181).
Quick Select Names
Change the quick select name that appears on the TV screen to one you
prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
The default setting is restored for the edited quick select
Set Defaults:
name.
Up to 16 characters can be input.
For character input, see "Using the keyboard screen" (v p. 181).
Front panel Display
Playback Settings
Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the TRIGGER OUT jacks, see
"TRIGGER OUT jacks" (v p. 79).
n When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
"On".
n When setting for input source
Activates trigger out when the input source set to "On" is selected.
n When setting for HDMI monitor
Activates trigger out when the HDMI monitor set to "On" is selected.
On:
– – –:
Rear panel 264
Tips
Activate trigger on this mode.
Do not activate trigger on this mode.
Remote Index
Appendix