Contents
Connections
o Detailed settings when "Assign Mode" is set to
"Dolby Atmos"
When "Assign Mode" is set to "Dolby Atmos", set the following items.
n Layout
Select the speaker layout for Dolby Atmos playback.
This is a layout that adds the top front and
top rear speakers to the 7.1 channel layout
which includes the surround back channel.
Connect the top front speakers to the
7.1ch + 4 Height:
HEIGHT1 speaker terminals and connect the
top rear speakers to the HEIGHT2 PRE OUT
connectors through an external power
amplifier.
This is a layout that adds the top middle
speakers to the 7.1 channel layout including
7.1ch + 2 Height
the surround back channel. Connect the top
(Default):
middle speakers to the HEIGHT1 speaker
terminals.
This is a layout that adds the top front and
top rear speakers to the basic 5.1 channel
layout. Connect the top front speakers to the
5.1ch + 4 Height:
HEIGHT1 speaker terminals and the top rear
speakers to the FRONT WIDE/HEIGHT2
speaker terminals.
Front panel
Display
Playback
Settings
5.1ch + 2 Height:
If you use "Dolby Atmos Enabled speakers", the "Assign Mode" is set to "11.1ch"
(v p. 227) or "9.1ch" (v p. 231).
Rear panel
239
Tips
This is a layout that adds the top middle
speakers to the basic 5.1 channel layout.
Connect the top middle speakers to the
HEIGHT1 speaker terminals.
Remote
Index
Appendix